Raspberry Pi Compute Module 3+
Raspberry Pi FoundationThe Raspberry Pi Compute Module 3+ (CM3+) contains the guts of a Raspberry Pi 3 Model B+ — including a 1.2GHz Broadcom BCM2837 SoC and 1GB RAM along with up to 32GB of eMMC flash — all integrated onto a small board that fits into a standard DDR2 SODIMM connector on a carrier board. All remaining processor interfaces are available to a carrier board via the module’s edge-connector, including many more GPIOs and interfaces than are supported on a standard Raspberry Pi SBC. The module is available with 32GB, 16GB, 8GB, or 0GB of on-board eMMC. Note: the price indicated below is for the 0GB eMMC “CM3+/Lite” model.
📅 Added on February 07, 2019
🔗 Official website
🛠️ Edit source (see our guide)
Hardware Specifications (Start Comparison)
| Manufacturer | Raspberry Pi Foundation |
|---|---|
| SoC | Broadcom BCM2837B0 |
| CPU | 4× ARM Cortex-A53 @ 1.2Ghz |
| GPU | VideoCore IV |
| RAM | 1.0 GiB |
| eMMC | 1× soldered |
| SD | 1× microSD (up to 32GB) slot bootable |
| USB |
1× host port
1x USB-OTG
|
| Video interfaces |
1×
HDMI
1× Composite
|
| Display I/O |
1× MIPI-DSI (Display Serial Interface)
|
| Audio |
2× I2S
|
| Camera I/O | 2× camera interfaces |
| GPIOs |
48× GPIOs
2× PWM
|
| Pin Header |
Raspberry Pi HAT
|
| Embedded I/O |
2× I2C
2× SPI
2× UART
|
| Generic Peripherals | - |
Physical Aspects
| Power Requirements |
2.5
– 5.0
V DC
0.7A
–1.4A
|
|---|---|
| Battery | - |
| Dimensions | 68mm x 31mm x 4mm |
| Form Factor | Raspberry Pi Compute Module 3 |
| Mounting holes | No |
| Temperature | -25.0°C to 80.0°C |
Software
| Linux |
Yes
Mainline Kernel |
|---|---|
| Android | - |
| Windows | - |
Certifications and conformity
(No information available)
Datasheets
No links were added yet.Availability
The reference price is (US) $31.0For purchase information, please refer to the official website .
